PLANET IGS-10020HPT - Manual (Page 30)

User’s Manual of IGS-10020PT / IGS-10020HPT
30
 High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
 Storm Control support:
− Broadcast / Multicast / Unicast
 Supports VLAN
− IEEE 802.1Q Tagged VLAN
− Up to 255 VLANs groups, out of 4094 VLAN IDs
− Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
− Private VLAN Edge (PVE)
− Protocol-based VLAN
− MAC-based VLAN
− Voice VLAN
 Supports Spanning Tree Protocol
− STP, IEEE 802.1D Spanning Tree Protocol
− RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
− MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
− BPDU Guard
 Supports Link Aggregation
− 802.3ad Link Aggregation Control Protocol (LACP)
− Cisco ether-channel (Static Trunk)
− Maximum 5 trunk groups, up to 8 ports per trunk group
− Up to 16Gbps bandwidth(Duplex Mode)
 Provides Port Mirror (1-to-1)
 Port Mirroring to monitor the incoming or outgoing traffic on a particular port
 Loop protection to avoid broadcast loops
 Supports E.R.P.S. (Ethernet Ring Protection Switching)
 Quality of Service
 Ingress Shaper and Egress Rate Limit per port bandwidth control
 8 priority queues on all switch ports
 Traffic classification:
− IEEE 802.1p CoS
− IP TOS / DSCP / IP Precedence
− IP TCP/UDP port number
− Typical network application
 Strict priority and Weighted Round Robin (WRR) CoS policies
 Supports QoS and In/Out bandwidth control on each port
 Traffic-policing policies on the switch port
 DSCP remarking
 Multicast
 Supports IGMP Snooping v1, v2 and v3
 Supports MLD Snooping v1 and v2