PLANET IGS-10020HPT - Manual (Page 195)

User’s Manual of IGS-10020PT / IGS-10020HPT
195
ports.

Receiver: Configure a port as a receiver port if it is a subscriber port
and should only receive multicast data. It does not receive data unless
it becomes a member of the multicast group by issuing IGMP/MLD
messages.

Be Caution: MVR source ports are not recommended to be
overlapped with management VLAN ports.
Select the port role by clicking the Role symbol to switch the setting.
I indicate Inactive; S indicates Source; R indicates Receiver
The default Role is Inactive.
• Immediate Leave
Enable the fast leave on the port.
Buttons
: Click to add new MVR VLAN. Specify the VID and configure the new entry. Click "Save"
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.8.15 MVR Status
This page provides MVR status. The MVR Status screen in Figure 4-8-18 appears.
Figure 4-8-18: MVR Status Page Screenshot
The page includes the following fields:
Object Description
• VLAN ID
The Multicast VLAN ID
• IGMP/MLD
Queries Received
The number of Received Queries for IGMP and MLD, respectively.
• IGMP/MLD
Queries Transmitted
The number of Transmitted Queries for IGMP and MLD, respectively.
• IGMPv1 Joins
Received
The number of Received IGMPv1 Joins.