5 auto-negotiation – PLANET IGS-10020HPT User Manual

Page 636

User’s Manual of IGS-10020PT / IGS-10020HPT

636

7.5 Auto-Negotiation

The STP ports on the Industrial Managed Switch have built-in “Auto-negotiation”. This technology automatically sets the

best possible bandwidth when a connection is established with another network device (usually at Power On or Reset). This

is done by detect the modes and speeds at the second of both device is connected and capable of, both 10Base-T and

100Base-TX devices can connect with the port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in

Full-duplex mode.

This manual is related to the following products: