Qos port dscp classification – PLANET IGS-10020HPT User Manual
Page 561
![background image](https://www.manualsdir.com/files/865324/content/doc561.png)
User’s Manual of IGS-10020PT / IGS-10020HPT
561
Parameters:
enable : Enable DSCP ingress translation
disable : Disable DSCP ingress translation
(default: Show DSCP ingress translation mode)
Default Setting:
disable
Example:
Enable DSCP ingress translation on all port.
IGS-10020HPT:/>qos Port DSCP Translation 1-10 enable
QoS Port DSCP Classification
Description:
Set or show DSCP classification based on QoS class and DP level.
This enables per port to map new DSCP value based on QoS class and DP level.
Syntax:
QoS Port DSCP Classification [
Parameters:
none : No DSCP ingress classification
zero : Classify DSCP if DSCP = 0
selected : Classify DSCP for which class. mode is 'enable'
all : Classify all DSCP
(default: Show port DSCP ingress classification mode)
Default Setting:
none
Example:
Set DSCP classification based on QoS class and DP level in zero
IGS-10020HPT:/> QoS Port DSCP Classification 1-10 zero