PLANET IGS-10020HPT - Manual (Page 336)

User’s Manual of IGS-10020PT / IGS-10020HPT
336
named Low, High and Critical.
The priority is used in the case when total power consumption has been over
total power budget. In this case the port with the lowest priority will be turned off,
and offer power for the port of higher priority.
• Power Allocation
It can limit the port PoE supply watts. Per port maximum value must be less
than 15.4 / 30.8 watts, and total ports values must be less than the Power
Reservation value. Once power overload is detected, the port will auto shut
down and keep on detection mode until PD’s power consumption is lower than
the power limit value
IGS-10020PT = 15.4 watts for per port PoE output
IGS-10020HPT = 30.8 watts for per port PoE output
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.4 PoE Status
This page allows the user to inspect the total power consumption and total power reserved and current status for all PoE ports.
The screen in Figure 4-16-4 appears.