PLANET XGSW-28040 User Manual

Page 74

User’s Manual of XGSW-28040

re-login the WEB interface about 60 seconds later, the System Reboot screen in

Figure 4-2-27

appears.

Figure 4-2-27

System Reboot page screenshot

Buttons

: Click to reboot the system.

: Click to return to the Port State page without reboot the system.

You can also check the SYS LED at the front panel to identify the System is load completely or not. If the SYS LED is blinking,

then it is in the firmware load stage; if the SYS LED light on, you can use the WEB browser to login the Switch.