PLANET XGSW-28040 - Manual (Page 484)

User’s Manual of XGSW-28040
LLDPMED Coordinates
Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [] [] [coordinate_value]
Parameters:
: The tude_type parameter takes the following values:
latitude : Latitude, 0 to 90 degrees with max. 4 digits (Positive numbers are north of the equator and negative numbers
are south of the equator).
longitude : Longitude, 0 to 180 degrees with max. 4 digits (Positive values are East of the prime meridian and negative
numbers are West of the prime meridian).
altitude : Altitude, -32767 to 32767 Meters or floors with max. 4 digits.
: The direction parameter takes the following values:
North : North (Valid for latitude)
South : South (Valid for latitude)
West : West (Valid for longitude)
East : East (Valid for longitude)
Meters : Meters (Valid for altitude)
Floor : Floor (Valid for altitude)
coordinate_value : Coordinate value
LLDPMED Datum
Description:
Set or show LLDP-MED Coordinates map datum.
Syntax:
LLDPMED Datum []
Parameters:
: The datum_type parameter takes the following values:
wgs84 : WGS84
nad83_navd88 : NAD83_NAVD88
nad83_mllw : NAD83_MLLW
484