PLANET XGSW-28040 - Manual (Page 280)

User’s Manual of XGSW-28040
 Max Dynamic Clients Specify the maximum number of dynamic clients can be learned on given ports.
This value can be 0, 1, 2 and unlimited. If the port mode is enabled and the value
of max dynamic client is equal 0, it means only allow the IP packets forwarding
that are matched in static entries on the specific port.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to translate all dynamic entries to static entries.
4.12.11 IP Source Guard Static Table
This page provides Static IP Source Guard Table. The Static IP Source Guard Table screen in Figure 4-12-11 appears.
Figure 4-12-11 Static IP Source Guard Table screen page screenshot
The page includes the following fields:
Object Description
 Delete Check to delete the entry. It will be deleted during the next save.
 Port The logical port for the settings.
 VLAN ID The VLAN ID for the settings.
 IP Address Allowed Source IP address.
 IP Mask It can be used for calculating the allowed network with IP address.
Buttons
: Click to add a new entry to the Static IP Source Guard table.
280