PLANET XGSW-28040 - Manual (Page 67)

User’s Manual of XGSW-28040
67
4.2.14 SMTP Configuration
This page facilitates a SMTP Configure the switch. The SMTP Configure screen in Figure 4-2-17 appears.
Figure 4-2-17 SMTP Configuration page screenshot
The page includes the following fields:
Object Description
 SMTP Mode Controls whether SMTP is enabled on this switch.
 SMTP Server Type the SMTP server name or the IP address of the SMTP server.
 SMTP Port Set port number of SMTP service.
 SMTP Authentication Controls whether SMTP authentication is enabled If authentication is required
when an e-mail is sent.
 Authentication User
Name
Type the user name for the SMTP server if Authentication is Enable.
 Authentication
Password
Type the password for the SMTP server if Authentication is Enable.
 E-mail From Type the sender’s E-mail address. This address is used for reply e-mails.
 E-mail Subject Type the subject/title of the e-mail.
 E-mail 1 To
 E-mail 2 To
Type the receiver’s e-mail address.