Qos dscp translation, Qos dscp trust, Qos dscp classification mode – PLANET XGSW-28040 User Manual
Page 498

User’s Manual of XGSW-28040
QoS DSCP Translation
Description:
Set or show global ingress DSCP translation table.
If port DSCP translation is enabled, translation table is used to translate incoming frames DSCP value and translated
value is used to map QoS class and DP level.
Syntax:
QoS DSCP Translation [
Parameters:
: DSCP (0-63) list or 'all'
(default: Show DSCP translation table)
: Translated DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43
QoS DSCP Trust
Description:
Set or show trusted DSCP value which is used for QoS classification.
The DSCP value to be checked for trust is either translated value ifDSCP translation is enabled for the ingress port or
incoming frame DSCPvalue if translation is disabled for the port. Trusted DSCP value is onlyused for QoS classification.
Syntax:
QoS DSCP Trust [
Parameters:
: DSCP (0-63) list or 'all'
enable
: Set DSCP as trusted DSCP
disable
: Set DSCP as un-trusted DSCP
(default: Show DSCP Trust status)
Default Setting:
disable
QoS DSCP Classification Mode
Description:
Set or show DSCP ingress classification mode.
498