PLANET XGSW-28040 - Manual (Page 214)

User’s Manual of XGSW-28040
 IP/Ethernet Length Specify whether frames can hit the action according to their ARP/RARP
hardware address length (HLN) and protocol address length (PLN) settings.
0 : ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is
equal to IPv4 (0x04).
1 : ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is
equal to IPv4 (0x04).
Any : Any value is allowed ("don't-care").
 IP Specify whether frames can hit the action according to their ARP/RARP
hardware address space (HRD) settings.
0 : ARP/RARP frames where the HLD is equal to Ethernet (1).
1 : ARP/RARP frames where the HLD is equal to Ethernet (1).
Any : Any value is allowed ("don't-care").
 Ethernet Specify whether frames can hit the action according to their ARP/RARP protocol
address space (PRO) settings.
0 : ARP/RARP frames where the PRO is equal to IP (0x800).
1 : ARP/RARP frames where the PRO is equal to IP (0x800).
Any : Any value is allowed ("don't-care").
 IP Parameters
The IP parameters can be configured when Frame Type "IPv4" is selected.
Object Description

IP Protocol Filter
Specify the IP protocol filter for this ACE.
Any : No IP protocol filter is specified ("don't-care").
Specific : If you want to filter a specific IP protocol filter with this ACE, choose this
value. A field for entering an IP protocol filter appears.
ICMP : Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for defining
ICMP parameters will appear. These fields are explained later in this help file.
UDP : Select UDP to filter IPv4 UDP protocol frames. Extra fields for defining
UDP parameters will appear. These fields are explained later in this help file.
TCP : Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining TCP
parameters will appear. These fields are explained later in this help file.
 IP Protocol Value When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
 IP TTL Specify the Time-to-Live settings for this ACE.
zero : IPv4 frames with a Time-to-Live field greater than zero must not be able to
match this entry.
non-zero : IPv4 frames with a Time-to-Live field greater than zero must be able to
match this entry.
214