PLANET XGSW-28040 - Manual (Page 199)

User’s Manual of XGSW-28040

Action Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class : Classified QoS class; if a frame matches the QCE it will be put in the
queue.
DPL : Drop Precedence Level; if a frame matches the QCE then DP level will set
to value displayed under DPL column.
DSCP : If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column.

Conflict Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
Please note that conflict can be resolved by releasing the H/W resources
required to add QCL entry on pressing 'Resolve Conflict' button.
Buttons
: Select the QCL status from this drop down list.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to release the resources required to add QCL entry, in case the conflict status for any QCL entry is
'yes'.
: Click to refresh the page.
4.9.13 Storm Control Configuration
This page allows you to configure the storm control settings for all switch ports.
There is a storm rate control for unicast frames, broadcast frames and unknown (flooded) frames.
The Storm Control Configuration screen in Figure 4-9-16 appears.
199