PLANET XGSW-28040 - Manual (Page 217)

User’s Manual of XGSW-28040
Range : If you want to filter a specific range TCP/UDP destination filter with this
ACE, you can enter a specific TCP/UDP destination range value. A field for
entering a TCP/UDP destination value appears.

TCP/UDP Destination
Number
When "Specific" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination value. The allowed range is 0 to 65535. A frame
that hits this ACE matches this TCP/UDP destination value.
 TCP/UDP Destination
Range
When "Range" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination range value. The allowed range is 0 to 65535. A
frame that hits this ACE matches this TCP/UDP destination value.
 TCP FIN Specify the TCP "No more data from sender" (FIN) value for this ACE.
0 : TCP frames where the FIN field is set must not be able to match this entry.
1 : TCP frames where the FIN field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP SYN Specify the TCP "Synchronize sequence numbers" (SYN) value for this ACE.
0 : TCP frames where the SYN field is set must not be able to match this entry.
1 : TCP frames where the SYN field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP RST Specify the TCP "Reset the connection" (RST) value for this ACE.
0 : TCP frames where the RST field is set must not be able to match this entry.
1 : TCP frames where the RST field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP PSH Specify the TCP "Push Function" (PSH) value for this ACE.
0 : TCP frames where the PSH field is set must not be able to match this entry.
1 : TCP frames where the PSH field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP ACK Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
0 : TCP frames where the ACK field is set must not be able to match this entry.
1 : TCP frames where the ACK field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP URG Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
0 : TCP frames where the URG field is set must not be able to match this entry.
1 : TCP frames where the URG field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 Ethernet Type Parameters
The Ethernet Type parameters can be configured when Frame Type "Ethernet Type" is selected.
Object Description

EtherType Filter Specify the Ethernet type filter for this ACE.
Any : No EtherType filter is specified (EtherType filter status is "don't-care").
217