PLANET XGSW-28040 - Manual (Page 523)

User’s Manual of XGSW-28040
6.20 Loop Protect Command
Loop Protect Configuration
Description:
Show Loop Protection configuration.
Syntax:
Loop Protect Configuration
Loop Protect Mode
Description:
Set or show the Loop Protection mode.
Syntax:
Loop Protect Mode [enable|disable]
Parameters:
enable : Enable Loop Protection
disable : Disable Loop Protection
Default Setting:
enable
Loop Protect Transmit
Description:
Set or show the Loop Protection transmit interval.
Syntax:
Loop Protect Transmit []
Parameters:
Transmit time interval (1-10 seconds)
Default Setting:
5
523