PLANET XGSW-28040 User Manual
Page 212

User’s Manual of XGSW-28040
MAC Parameters
Object
Description
SMAC Filter
(Only displayed when the frame type is Ethernet Type or ARP.)
Specify the source MAC filter for this ACE.
Any
: No SMAC filter is specified. (SMAC filter status is "don't-care".)
Specific
: If you want to filter a specific source MAC address with this ACE, choose this
value. A field for entering an SMAC value appears.
SMAC Value
When "Specific" is selected for the SMAC filter, you can enter a specific source MAC
address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE matches
this SMAC value.
DMAC Filter
Specify the destination MAC filter for this ACE.
Any
: No DMAC filter is specified. (DMAC filter status is "don't-care".)
MC
: Frame must be multicast.
BC
: Frame must be broadcast.
UC
: Frame must be unicast.
Specific
: If you want to filter a specific destination MAC address with this ACE, choose
this value. A field for entering a DMAC value appears.
DMAC Value
When "Specific" is selected for the DMAC filter, you can enter a specific destination
MAC address. The legal format is "xx-xx-xx-xx-xx-xx". A frame that hits this ACE
matches this DMAC value.
VLAN Parameters
Object
Description
VLAN ID Filter
Specify the VLAN ID filter for this ACE.
Any
: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
Specific
: If you want to filter a specific VLAN ID with this ACE, choose this value.
A field for entering a VLAN ID number appears.
VLAN ID
When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN
ID number. The allowed range is 1 to 4095. A frame that hits this ACE matches
this VLAN ID value.
Tag Priority
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag
priority. The allowed number range is 0 to 7. The value Any means that no tag
priority is specified (tag priority is "don't-care".)
ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object
Description
212