PLANET XGSW-28040 - Manual (Page 220)

User’s Manual of XGSW-28040
Please note that the System Log memory size and logging rate is limited.
 Shutdown Specify the port shut down operation of this port. The allowed values are:
Enabled : If a frame is received on the port, the port will be disabled.
Disabled : Port shut down is disabled.
The default value is "Disabled".
 State Specify the port state of this port. The allowed values are:
Enabled : To reopen ports by changing the volatile port configuration of the ACL
user module.
Disabled : To close ports by changing the volatile port configuration of the ACL
user module.
The default value is "Enabled".
 Counter Counts the number of frames that match this ACE.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the page; any changes made locally will be undone.
: Click to clear the counters.
4.10.5 ACL Rate Limiter Configuration
Configure the rate limiter for the ACL of the switch.
The ACL Rate Limiter Configuration screen in Figure 4-10-5 appears.
220