PLANET XGSW-28040 - Manual (Page 304)

User’s Manual of XGSW-28040
Figure 4-14-4 LLDP Neighbor Information page screenshot
The page includes the following fields:
Object Description
 Local Port The port on which the LLDP frame was received.
 Chassis ID The Chassis ID is the identification of the neighbor's LLDP frames.
 Remote Port ID The Remote Port ID is the identification of the neighbor port.
 System Name System Name is the name advertised by the neighbor unit.
 Port Description Port Description is the port description advertised by the neighbor unit.
 System Capabilities System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
 Management Address Management Address is the neighbor unit's address that is used for higher layer
entities to assist the discovery by the network management. This could for
instance hold the neighbor's IP address.
Buttons
: Click to refresh the page immediately.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
304