Qos port tagremarking map, Qos port dscp translation – PLANET XGSW-28040 User Manual
Page 495

User’s Manual of XGSW-28040
Precedence level' to a 1 bit 'Drop Precedence level' used in the mapping process. Up to four values (0 or 1) in increasing
order is acccepted. Example: 'QoS Port TagRemarking DPL 4 0 0 1 1' sets the table for port 4 to:
DP level 0 -> 0, DP level 1 -> 0, DP level 2 -> 1, DP level 3 -> 1.
Syntax:
QoS Port TagRemarking DPL [
Parameters:
: Port list or 'all', default: All ports
: Drop Precedence Level (0-1)
Default Setting:
0
QoS Port TagRemarking Map
Description:
Set or show the port tag remarking map. This map is used when port tag remarking mode is set to 'mapped', and the
purpose is to translate the classified QoS class (0-7) and DP level (0-1) to PCP and DEI.
Syntax:
QoS Port TagRemarking Map [
Parameters:
: Port list or 'all', default: All ports
: QoS class list or 'all', default: All QoS classes (0-7)
: DP level list or 'all', default: All DP levels (0-1)
: Priority Code Point (0-7)
: Drop Eligible Indicator (0-1)
QoS Port DSCP Translation
Description:
Set or show DSCP ingress translation mode.
If translation is enabled for a port, incoming frame DSCP value is translated and translated value is used for QoS
classification.
Syntax:
495