PLANET XGSW-28040 - Manual (Page 320)

User’s Manual of XGSW-28040
identifying the sFlow receiver.
 IP Address/Hostname The IP address or hostname of the sFlow receiver.
 Timeout The number of seconds remaining before sampling stops and the current sFlow
owner is released.
 Tx Successes The number of UDP datagrams successfully sent to the sFlow receiver.
 Tx Errors The number of UDP datagrams that has failed transmission.
The most common source of errors is invalid sFlow receiver IP/hostname
configuration. To diagnose, paste the receiver's IP address/hostname into the
Ping Web page (Diagnostics → Ping/Ping6).
 Flow Samples The total number of flow samples sent to the sFlow receiver.
 Counter Samples The total number of counter samples sent to the sFlow receiver.
Port Statistics
Object Description
 Port The port number for which the following statistics applies.
 Rx and Tx Flow
Samples
The number of flow samples sent to the sFlow receiver originating from this port.
Here, flow samples are divided into Rx and Tx flow samples, where Rx flow
samples contains the number of packets that were sampled upon reception
(ingress) on the port and Tx flow samples contains the number of packets that
were sampled upon transmission (egress) on the port.
 Counter Samples The total number of counter samples sent to the sFlow receiver originating from
this port.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page.
: Clears the sFlow receiver counters.
: Clears the per-port counters.
320