2 loop protection status – PLANET XGSW-28040 User Manual
Page 314

User’s Manual of XGSW-28040
The page includes the following fields:
General Settings
Object
Description
Enable Loop
Protection
Controls whether loop protections is enabled (as a whole).
Transmission Time
The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.
Shutdown Time
The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
Port Configuration
Object
Description
Port
The switch port number of the port.
Enable
Controls whether loop protection is enabled on this switch port.
Action
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
Tx Mode
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Buttons
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
4.16.2 Loop Protection Status
This page displays the loop protection port status the ports of the switch, screen in
Figure 4-16-2
appears.
Figure 4-16-2
Loop protection status screenshot
314