PLANET XGSW-28040 - Manual (Page 248)

User’s Manual of XGSW-28040
applies.
 Enabled Enable the RADIUS Accounting Server by checking this box.
 IP Address/Hostname The IP address or hostname of the RADIUS Accounting Server. IP address is
expressed in dotted decimal notation.
 Port The UDP port to use on the RADIUS Accounting Server. If the port is set to 0
(zero), the default port (1813) is used on the RADIUS Accounting Server.
 Secret The secret - up to 29 characters long - shared between the RADIUS Accounting
Server and the switch.
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
Object Description
 # The TACACS+ Authentication Server number for which the configuration below
applies.
 Enabled Enable the TACACS+ Authentication Server by checking this box.
 IP Address/Hostname The IP address or hostname of the TACACS+ Authentication Server. IP address
is expressed in dotted decimal notation.
 Port The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0
(zero), the default port (49) is used on the TACACS+ Authentication Server.
 Secret The secret - up to 29 characters long - shared between the TACACS+
Authentication Server and the switch.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
248