PLANET XGSW-28040 - Manual (Page 190)

User’s Manual of XGSW-28040
for individual ports.
There are two configuration parameters available in Ingress:
 Translate
 Classify
 Translate To Enable the Ingress Translation click the checkbox.
 Classify Classification for a port have 4 different values.
 Disable: No Ingress DSCP Classification.
 DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
 Selected: Classify only selected DSCP for which classification is enabled
as specified in DSCP Translation window for the specific DSCP.
 All: Classify all DSCP.

Egress Port Egress Rewriting can be one of -
 Disable: No Egress rewrite.
 Enable: Rewrite enable without remapped.
 Remap: DSCP from analyzer is remapped and frame is remarked with
remapped DSCP value.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.8 DSCP-Based QoS
This page allows you to configure the basic QoS DSCP based QoS Ingress Classification settings for all switches. The
DSCP-Based QoS screen in Figure 4-9-10 appears.
190