RISCO Group LightSYS - Manual (Page 43)

User Functions and Settings
Page 43 LightSYS User Manual
Operation GM U In.
Event Log √ - √
Allows the viewing of significant system events including date
and time.
Notes:
The events memory cannot be erased.
To skip 10 event at a time backward or forward use the and
keys consecutively .
Maintenance
Walk test √ - √
Enables to easily test and evaluate the operation of selected zones
in your system. Walk test is set for up to 60 minutes. During the
last five minutes of walk test mode, the keypad used to perform
the walk test will indicate that the walk test period is about to end.
Full walk test — The test displays the detected zones and type of
detection.
Quick walk test —The test displays the undetected zones.
Keypad test √ - √
Momentarily tests the keypad indicators.
Siren test √ -
Activates the squawk sound in the selected siren.
Macro √ - √
LightSYS enables the installer or GM to record a series of
commands and assign them to a macro. For more information,
refer to section page 34.
Stand Alone Keyfobs √ - √
LightSYS enables the installer or GM to assign up to 200 keyfobs
that can be used for gate control. For addition information refer to
page 36.