RISCO Group LightSYS - Manual (Page 33)

User Functions and Settings
Page 33 LightSYS User Manual
Scheduling Weekly Programs
The LightSYS enables you to automate some system operations. Each program can be
defined with up to two time intervals per day, during which the system automatically
performs one of the following functions
:

Automatic Arming/Disarming: This program automatically arms and disarms the
system during your required time intervals.

Automatic UO Activation: A UO (home appliance) activation program
automatically activates and deactivates UOs during your required intervals.

User Limitation: A user limitation program automatically prevents certain users
from disarming the system during specified time intervals.
Up to four scheduling programs can be defined. Use the table in Appendix C – Scheduling
Tables to define your date.
Automatic Arming/Disarming
1. Press and enter your code followed by .
2. Using the arrow keys, scroll to the option Clock and press .
3. Using the arrow keys, scroll to the Scheduler option and press .
4. Using the arrow keys, scroll to the Weekly option and press .
5. Select the Schedule program index number.
6. Select Arm / Disarm and press .
7. Follow the LCD display messages that will guide you through the programming
procedure. When defining Arm/Disarm program, you need to define the following
parameters: Partition, Time Schedule, Arming mode, and Label
Notes:

When defining the Day/Time intervals for each day of the week you can
select 8 All to set the same time intervals for every day in the week.

Use key to enter Y when requested. For example when defining a
partition that will be automatically armed and disarmed

Leave the time at 00:00 if you do not want to perform the automation
during the current interval for the current day