RISCO Group LightSYS - Manual (Page 27)

User Functions and Settings
Page 27 LightSYS User Manual
Setting / Changing User Codes
The user assigned the grand master authority level can change all user codes but cannot
view the digits in the user code fields. Users with other authority levels can only change
their own codes. The system must be disarmed in order to set or change user codes.
To set/change a user code:
1. Press and enter your code followed by .
2. Using the arrow keys, scroll to the option Codes/Tags and press .
3. Scroll to Define and press .
4. Select the user index number and press .
5. Select Edit Code and press .
Note:
In the LightSYS system, the User Index number range is from 00 to 15.
(00=Grand master)
6. Enter the new code followed by .
If successful, a single confirmation beep is sounded; if not, three quick error beeps are
sounded
7. Repeat the above steps for additional codes until you have completed your list
Deleting User Codes
At times, you may want to completely delete a user code. Note that it is impossible to
delete the grand master code (although it can be changed).
The system must be disarmed in order to delete user codes.
To delete a user code:
1. Follow steps 1-4 of the previous procedure (See Setting/Changing User Codes)
2. Scroll the menu to the option Delete and press .
3. If successful, a single confirmation beep is sounded; if not, three quick error beeps are
sounded.
4. Repeat the above steps for deleting additional codes.