RISCO Group LightSYS - Manual (Page 22)

Arming and Disarming
LightSYS User Manual Page 22
Additional Arm/Disarm Capabilities
Automatic Arm/Disarm
The LightSYS has the ability to define automatic system arming at a predefined time
of a day. An Arm/Disarm program automatically arms and disarms the system during
your required time intervals. When defining the automatic arming/disarming
program, you need to define the following parameters: Partition, Arming Mode
(Away/Stay), Time, and Label.
Arm /Disarm from your Wireless Keyfob
The system can be armed using a wireless keyfob (If equipped with a wireless module
expansion). For detailed information regarding the keyfob operation consult with your
installer .
Full Arm Press.
Disarm Press the  button. All partitions assigned to
the button will be disarmed
Stay Arm Press  button or button 4 (if defined)
Partition
Arm Press  button or button 4 (if defined)
Remote Arm/Disarm Using SMS
If your LightSYS is equipped with GSM/GPRS module you can perform the
arming/disarming operations using SMS commands. For more information refer to your
installer. For a full list of SMS operations, refer to Appendix D – SMS Operation.
Full Arm [Code][A], example, 1234A
Full Disarm [Code][D], example, 1234D
Stay Arm [Code][H], example, 1234H
Partition Arm [Code][A] [Partition No.] examples:
To arm partitions 1: 1234A1
To arm partitions 1 and 2: 1234A12
Partition Disarm [Code][D] [Partition No.] Example
1234D1