RISCO Group LightSYS - Manual (Page 34)

User Functions and Settings
LightSYS User Manual Page 34
Automated Output Operation
A UO (home appliance) activation program automatically activates and deactivates UOs
during your required intervals. In each program, you can define four UOs to operate
simultaneously. When defining a UO activation program, you need to define the
following parameters: UOs, Time Schedule, Vacation, and Label
1. Repeat stages 1- 5 of the Arming/Disarming schedule programming procedure
2. Select UO On/Off and press .
3. Follow the LCD display messages that will guide you through the programming
procedure.
Note:
The Vacation option for the UO scheduling program defines the way in which the
group of UOs are activated during a vacation:
N: During vacation, UOs are activated in the same way as defined in the time
windows of the week.
Y: UOs are activated during the vacation according to the time schedule defined in
the next step (vacation definition).
User Limitation Program
A user limitation program automatically prevents certain users from disarming the system
during specified time intervals. By default, all users of the system operate without this
limitation. When defining a user limitation program, you need to define the following
three parameters: Users, Time Schedule, and Label
1. Repeat stages 1- 5 of the Arming/Disarming schedule programming procedure
2. Select User Limit and press .
3. Follow the LCD display messages that will guide you through the programming
procedure
Quick Activation/Deactivation of a Weekly Program
1. Press and enter your code followed by .
2. Using the arrow keys, scroll to the option Clock and press .
3. Using the arrow keys, scroll to the Scheduler option and press .
4. Using the arrow keys, scroll to the Schedule Enable option and press .
5. Select the Schedule program index number.
6. Use the key to toggle activate /deactivate and press .