RISCO Group LightSYS - Manual (Page 15)

Arming and Disarming
Page 15 LightSYS User Manual
3. During the exit delay time period:

the keypad beeps

the icon flashes

the icon lights
indicating that the interior zones are being bypassed.
4. When the exit delay time period has expired, the icon lights steadily.
Notes:
1. Press to cancel the Entry Delay time period for the current STAY arming.
2. Press during the exit delay time period to silence the keypad beeps.
Partition arming
A key LightSYS advantage is its ability to divide the system into up-to-four partitions. Each
partition can be managed as a separate security sub-system, that is, armed and disarmed
individually, regardless of the condition of the others
Partitions can be armed or disarmed one at a time, or all at once, and each partition can be
armed as stay or away. Only users who have been defined to operate multiple partitions can
operate more than one partition and simultaneously arm/disarm all partitions.
To arm specific partitions:
1. Verify that the system is ready to arm.
2. For away arming enter your user code followed by or hold the tag close to the
keypad's keys. For stay arming, press .
3. Select the number of the partition you want to arm.
Notes:
If your user code is assigned to more than one partition, use the or keys to
select the required partition(s) and press . Select "0" to arm all partitions assigned
to a code.
4. Press / Present Tag (For away arm) or press (stay arm) to arm the selected
partition(s).
5. Repeat the above steps to arm additional partitions