RISCO Group LightSYS - Manual (Page 16)

Arming and Disarming
LightSYS User Manual Page 16
Examples:

To away arm partition 3 with user code: 1234:
1-2-3-4 3 or 1-2-3-4 [ ] 3 [ ]

To arm all partitions:
1-2-3-4 0

To arm partitions 3 and 4:
1-2-3-4 3 4

To arm partition 3 in stay mode:
1-2-3-4 3
Notes:
Keypads and Partitions — Each keypad is assigned to different partition(s). The grand
master and the manager (with access to all partitions) can use any keypad to access any
partition. Other users can use only designated keypads.
Common Zones — Partitioned systems have to share common zones. For example, a
shared front door to two family houses must be available to both families and is therefore
shared between them.
A common zone(s) is armed only if all partitions sharing the zone(s) are armed. The
common zone(s) is disarmed if any of the partitions, to which the zone(s) is assigned, are
disarmed.
If the system is defined to work in area mode, the common zone will be armed if any
partition sharing the zone is armed. The common zone will be disarmed if all the partitions
sharing the zone are disarmed.
Group Arming
Group arming enables you to arm a number of zones within a partition, using the function
keys , ,
,
. Ask your installer about group definition in the system.
Each partition can be defined with up to four groups.
To arm a group (if the system has one partition):
1. Verify that the system is ready to arm.
2. Enter your code, followed by pressing for two seconds the key for the
corresponded group you want to arm (A , B , C
,
D
).
The selected group is armed.
For example, to arm group C, enter: [Code] [ for two seconds].
3. To arm another group, repeat the above steps .