RISCO Group LightSYS - Manual (Page 40)

User Functions and Settings
LightSYS User Manual Page 40
Operation GM U In.
User call: Use this function to receive the SIM credit level using
the voice channel. Upon accessing this option, a dial tone is
received and the LightSYS keypad functions as a GSM telephone.
You can dial and listen to messages as with a regular telephone.
To end the call press the key.
Notes:

The outgoing call will always be executed through the GSM
channel.

Talking is not optional during the call.

This option can be used to get any provider information.

The call can be established to any phone number
Advanced √ - √
Switch AUX: Interrupts the power supplied to the system's
smoke detector(s) for a predetermined interval, thus resetting and
"readying" them for subsequent alarms
Overload restore: Use this option to restore overloading of the
system’s switched power supply. If the overload condition is still
present, disconnect all loads from AUX.
Follow Me
Define √ - √
Destination: Used to define (up-to-16) Follow Me destinations
according to its type: Voice message, SMS or E-mail. For more
information refer to page 31.
Label: Identifying labels for the Follow Me destination. Enter the
labels according to the instruction defined for user label on page
28
Terminate Follow Me √ - -
If Follow Me destination(s) were chosen, their operation can be
terminated. Use this function when an alarm has been tripped and
there is no need to utilize the Follow Me feature.
Test Follow Me √ - √
Used to test Follow Me reporting.