beautypg.com

Sent fax quality is poor, Faxes are sent at the wrong size – Epson L1455 User Manual

Page 206

background image

Related Information

&

“Saving Received Faxes in the Inbox” on page 117

&

“Saving Received Faxes on a Computer” on page 118

&

“Saving Received Faxes in an External Memory Device” on page 118

&

“Sending Many Pages of a Monochrome Document (Direct Send)” on page 112

&

“Sending Faxes Dialing from the External Phone Device” on page 110

&

“Sending Faxes After Confirming the Recipient's Status” on page 110

&

“Removing Jammed Paper” on page 174

Sent Fax Quality Is Poor

❏ Clean the scanner glass.
❏ Clean the ADF.
❏ Change the Resolution setting on the control panel. If your originals contain both text and photos, select

Photo

.

❏ Change the Density setting on the control panel.
❏ If you are not sure about the capabilities of the recipient fax machine, enable the Direct Send feature or select

Fine

as the Resolution setting.

If you select Super Fine or Ultra Fine for a monochrome fax, and send the fax without using the Direct Send
feature, the printer may automatically lower the resolution.

❏ Enable the ECM setting on the control panel.

Related Information

&

“Menu Options for Fax Mode” on page 124

&

“Basic Settings” on page 128

&

“Cleaning the Scanner Glass” on page 144

&

“Cleaning the ADF” on page 143

Faxes are Sent at the Wrong Size

❏ Before you send an A3 size document, ask the recipient if the recipient's machine supports A3 size. If you see

OK (Reduced Size)

in the fax transmission report, the recipient's fax machine does not support A3 size.

❏ When sending a fax using the scanner glass, place the original correctly aligning its corner with the origin mark.

Select your original size on the control panel.

❏ If you have placed the printer in direct sunlight or near a light source, the scanner glass may not detect the

document correctly. Select your original size on the control panel.

❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may

extend to include the dust or stains, resulting in the wrong scanning position or small images.

Related Information

&

“Menu Options for Fax Mode” on page 124

&

“Placing Originals” on page 52

&

“Cleaning the Scanner Glass” on page 144

User's Guide

Solving Problems

206