Ink bottle codes, Ink bottle handling precautions – Epson L1455 User Manual
Page 132
Ink Bottle Codes
Epson recommends the use of genuine Epson ink bottles. Epson warranty does not cover damage caused by inks
other than those specified, including any genuine Epson ink not designed for this printer or any third party ink.
Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior.
The following are the codes for genuine Epson ink bottles.
BK: Black
C: Cyan
M: Magenta
Y: Yellow
774
664
664
664
c
Important:
Use of genuine Epson ink other than the specified ink could cause damage that is not covered by Epson's warranties.
Note:
❏ Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.
❏ For users in Europe, visit the following website for information on Epson's ink bottle yields.
Related Information
&
“Technical Support Web Site” on page 227
Ink Bottle Handling Precautions
Read the following instructions before refilling ink.
Handling precautions
❏ Use ink bottles with the correct part code for this printer.
❏ This printer requires careful handling of ink. Ink may splatter when the ink tanks are filled or refilled with ink.
If ink gets on your clothes or belongings, it may not come off.
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Store the ink bottles in the same environment as the printer.
❏ When storing or transporting an ink bottle after removing its seal, do not tilt the bottle and do not subject it to
impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely.
Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking
when you transport the bottle.
❏ After bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to fill the ink tank. The ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
User's Guide
Refilling Ink and Replacing Maintenance Boxes
132