Epson L1455 - Manual (Page 129)

Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
ECM
Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by
telephone line noise. If this is disabled, you cannot send or receive documents in color.
Dial Tone Detection
Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch
Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the Line
Type
setting to PBX. If this does not work, disable this feature. However, disabling this feature may
drop the first digit of a fax number and send the fax to the wrong number.
Dial Mode
Select the type of phone system to which you have connected the printer. When set to Pulse, you can
temporarily switch the dialing mode from pulse to tone by pressing ("T" is entered) while entering
numbers on the fax top screen. Depending on the region, this setting may not be displayed.
Line Type
Select the line type to which you have connected the printer. When using the printer in an environment
that uses extensions and requires an external access code, such as 0 and 9, to get an outside line, select
PBX
and register the access code. Once you have registered the access code, enter # (hash) instead of the
access code when sending a fax to an outside fax number. For an environment that uses a DSL modem
or terminal adapter, setting to PBX is also recommended.
Header
Enter your sender name and fax number. These appear as a header on outgoing faxes. You can enter up
to 40 characters for your name, and up to 20 digits for your fax number.
Security Settings
Select the menus on the control panel as described below.
Setup > System Administration > Fax Settings > Security Settings
Direct Dialing Restrictions
Enable this to disable the manual entry of recipient's fax numbers allowing the operator to select
recipients only from the contacts list or sent history. Select Enter Twice to require the operator to enter
the fax number again when the number was manually entered.
Confirm Address List
Displays a recipient confirmation screen before starting the transmission.
Inbox Password Settings
Password protects the inbox to restrict users from viewing received faxes. Select Change to change the
password, and select Reset to cancel password protection. When changing or resetting the password,
you need the current password.
Backup Data Auto Clear
User's Guide
Faxing
129