Enterasys Networks 2000 - Manual (Page 172)

ATM Configuration
7-2 Accessing the ATM Connections Window
Figure 7-1. Current ATM Connections Window
The Current ATM Connections window provides the following information about
the device’s ATM connections:
Connection Data
The Connection Data fields provide the following information about each ATM
interface available on the device:
I/F Displays the index number assigned to each ATM
interface present on the selected module. The
HSIM-A6DP will provide a single ATM interface,
indexed 27.
Maximum Connections Displays the maximum number of connections allowed
by current device firmware.
Current Configured Displays the number of Permanent Virtual Circuits, or
PVCs, currently configured.
Settings
The Settings portion of the window contains a list box which displays information
about each of the currently configured PVCs, as well as the fields used to
configure new connections:
I/F The device interface on which the PVC was configured.