Epson ACULASER C3800 - Manual (Page 268)

Troubleshooting 268
EPSON AcuLaser C3800 User's Guide
Memory Problems
Print quality decreased
Insufficient memory for current task
Insufficient memory to print all copies
Cause What to do
The printer cannot print in the required quality
level because of insufficient memory, and
the printer lowers the quality automatically so
that the printer can continue printing. Check to see if the printout is acceptable. If not, add
more memory for a permanent solution or lower print
quality temporarily in the printer driver.
If RAM Disk is set to Maximum or Normal on the control
panel, you can increase the available memory
space by changing this setting to Off.
Cause What to do
The printer has insufficient memory for current
task. Add more memory for a permanent solution or lower
print quality temporarily in the printer driver.
If RAM Disk is set to Maximum or Normal on the control
panel, you can increase the available memory
space by changing this setting to Off.
Cause What to do
The printer does not have sufficient memory
to collate print jobs. Only one set of copies will be printed. Reduce the
contents of print jobs, or add more memory. For
information on installing more memory, see "Memory
Module" on page 220.
If RAM Disk is set to Maximum or Normal on the control
panel, you can increase the available memory
space by changing this setting to Off.