Epson ACULASER C3800 - Manual (Page 190)

Using the Control Panel 190
EPSON AcuLaser C3800 User's Guide
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
I239X Menu
The I239X mode emulates IBM
®
2390/2391 Plus commands.
These settings are available only when the printer is in the I239X mode.
*1
Depends on whether Letter (63) or A4 (67) paper has been selected.
*2
Depends on whether Letter (1) or A4 (2) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi
(characters per inch). You can also choose proportional spacing.
Code Page
Selects the character tables. Character tables contain the characters and symbols used by
different languages. The printer prints text based on the selected character table.
Item Settings (default in bold)
Font Courier, Prestige, Gothic, Orator, Script, Presentor, Sans serif
Pitch 10, 12, 15, 17, 20, 24 cpi, Prop.
Code Page 437, 850, 858, 860, 863, 865
T. Margin 0.30 ... 0.40 ...1.50 inches in 0.05-inch increments
Text 1 ... 63/67
*1
... 81 lines
Auto CR Off, On
Auto LF Off, On
Alt. Graphics Off, On
Bit Image Dark, Light
ZeroChar 0, (or the zero character with a slash)
CharacterSet 1
*2
, 2
*2