Epson ACULASER C3800 - Manual (Page 153)

Using the PostScript Printer Driver 153
EPSON AcuLaser C3800 User's Guide
4. Select Specify a location, then specify the following path for the CD-ROM. If your
CD-ROM drive is D:, the path will be D:\ADOBEPS\ENGLISH\WIN9X\PS_SETUP
Then click Next.
5. Click Next to continue.
6. When installation of the USB Device Driver is done, click Finish.
7. For Windows 2000, Me, or 98, click Start, point to Settings, and click Printers. Then
double-click the Add Printer icon.
For Windows XP or XP x64, click Start, point to Printer and Faxes, and click Add a
printer in the Printer Tasks menu.
8. The Add Printer Wizard appears. Then click Next.
9. For Windows Me or 98, go to step 11.
For Windows XP, XP x64, or 2000, select Local printer, then click Next.
Note:
For Windows XP, XP x64, or 2000, do not select the Automatically detect and install my
Plug and Play printer check box.
10. Select USB as the port the printer is connected to, then click Next.
11. Click Have Disk and specify the following path for the CD-ROM. If your CD-ROM drive
is D:, the path will be D:\ADOBEPS\ENGLISH\Folder Name\PS_SETUP
Then click OK.
Note:
❏ Change the drive letter as needed for your system.
❏ The folder name differs depending on your operating system version.
12. Select the printer, then click Next.
13. For Windows Me or 98, select USB as the port the printer is connected to, then click
Next.
For Windows XP, XP x64, or 2000, go to the next step.
14. Follow the on-screen instructions for the rest of the installation.
15. When installation is done, click Finish.
Operating system version Folder Name
Windows Me or 98 WIN9X
Windows XP, XP x64, or 2000 WIN2K_XP