Epson ACULASER C3800 - Manual (Page 188)

Using the Control Panel 188
EPSON AcuLaser C3800 User's Guide
ZeroChar
Specifies whether the printer prints a slashed or unslashed zero.
FX Menu
This menu allows you to make settings which affect the printer when it is in the FX
emulation mode.
* Depending on whether Letter (62) or A4 (66) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi
(characters per inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
Item Settings (default in bold)
Font Courier, Prestige, Roman, Sans serif, Script, Orator S
Pitch 10, 12, 15 cpi, Prop.
Condensed Off, On
T. Margin 0.40 ... 0.50 ... 1.50 inches in 0.05-inch increments
Text 1... 62/66*... 81 lines
CGTable PcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2,
PcIcelandic, PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO
Latin1, 8859-15ISO
Country USA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway,
Denmark2, Spain2, LatinAmeric
Auto CR On, Off
Auto LF Off, On
Bit Image Dark, Light, BarCode
ZeroChar 0, (or the zero character with a slash)