Epson ACULASER C3800 - Manual (Page 203)

Using the Control Panel 203
EPSON AcuLaser C3800 User's Guide
Wrong Toner uuuu
An inappropriate imaging cartridge is installed. Install only the imaging cartridge listed in
"Consumable products" on page 24.
See "Imaging Cartridge" on page 228 for instructions on replacing the imaging cartridge.
(The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan, Magenta,
Yellow, and Black respectively.)
Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s memory using the Re-Print Job and Verify Job options of
the Reserve Job function can be printed and deleted using the control panel’s Quick Print
Job Menu. Jobs saved using the Confidential Job option can be printed from the
Confidential Job Menu. Follow the instructions in this section.
Note:
You need to keep sufficient RAM disk capacity in order to use the Reserve Job function. To enable
RAM disk, you have to set the RAM Disk setting on the control panel to Normal or Maximum. We
recommend installing an optional memory to use this function. For instructions about increasing
your printer’s memory, see "Installing a memory module" on page 220.
Using the Quick Print Job Menu
Follow the steps below to print or delete Re-Print Job and Verify Job data.
1. Make sure the LCD panel displays Ready or Sleep, then press the Enter button to
access the control panel menus.
2. Press the d Down button repeatedly until Quick Print Job Menu appears on the LCD
panel, then press the Enter button.
3. Use the d Down or u Up button to scroll to the appropriate user name, then press the
Enter button.
4. Use the d Down or u Up button to scroll to the appropriate job name, then press the
Enter button.
5. To specify the number of copies you want to print, press the Enter button, then use
the d Down and u Up buttons to select the number of copies.
To delete the print job without printing any copies, press the d Down button to display
Delete
on the LCD panel.