Epson ACULASER C3800 - Manual (Page 194)

Using the Control Panel 194
EPSON AcuLaser C3800 User's Guide
Collate Disabled
Printing by specifying the number of copies is no longer possible due to a lack of memory
(RAM). If this error occurs, print only one copy at a time.
To clear this error, select Clear Warning from the control panel’s Reset Menu. For
instruction about accessing the control panel menus, see "How to access the control panel
menus" on page 165.
Cooling Down zz min
The printer is cooling down. The time until the printer is ready to print is displayed.
Data will be printed in Black and White
Color data is printed in black and white because one or more color imaging cartridges has
reached the end of its service life.
DM Error yyy
The Duplex Unit has become separated from the printer.
Duplex Mem Overflow
There is not enough memory for duplex printing. The printer prints only on the front and
ejects the paper. To clear this error, follow the instructions below.
If Off is selected as the Auto Cont setting on the control panel’s Setup Menu, press the
N
Start/Stop button to print on the back of the next sheet, or press the + Cancel Job
button to cancel the print job.
If On is selected as the Auto Cont setting on the control panel’s Setup Menu, printing
continues automatically after a certain period of time.
Form Data Canceled
Unable to store form overlay data on the USB memory. Either USB memory is not
recognized, USB memory is full, or the maximum number of form overlay files has been
reached. Confirm that the USB memory is installed correctly, replace the USB memory with
the one that has more empty space, or delete any form overlay files you no longer need,
then try storing the new overlay again.
To clear this error, select Clear Warning from the control panel’s Reset Menu. For
instruction about accessing the control panel menus, see "How to access the control panel
menus" on page 165.