KACO blueplanet gridsave eco 5.0 TR1 - Manual (Page 34)

Configuration and Operation
Page 34 Operating instructions for blueplanet-gridsave eco_EN
Backup settings for solar for solar hybrid systems (on-grid)
Setting Tab Notes
AC source disconnect alarm System
If this function is activated, an acoustic warning
signal is sounded if the supplying AC source fails
(mains failure, generator failure).
SoC shutdown Inverter
With the function activated, the GS eco dis-
charges the battery only to the set charge status.
Periodic recharge Battery
Maintenance charge to compensate for the
self-discharge of the batteries that are kept in the
trickle phase for a long time.
Shunt name and limits Shunts
For DC-connected solar systems or 3-phase grid-
save eco systems.
KACO link and number System
Use of connected KACO inverters and the quan-
tity.
Settings for tariff optimisation for solar hybrid systems (on-grid)
Setting Tab Notes
Shunt name and limits Shunts
For DC-connected solar systems or 3-phase grid-
save eco systems.
KACO link and number System
Use of connected KACO inverters and the quan-
tity.
AC input capacity schedule
AC source – AC
input
The times and limit values to restrict the power
supply, if possible.
SoC shutdown Inverter
Charge status of the battery from which the
supply is ensured again via the AC source.
Settings for off-grid systems
Setting Tab Notes
Shunt name and limits Shunts
For DC-connected solar systems or 3-phase grid-
save eco systems.
KACO link and number System
Use of connected KACO inverters and the quan-
tity.
Generator controller
AC source – gener-
ator controller
Deactivate if starting the generator manually.
NOTE
Comprehensive information on all configuration settings can be found in the "GS eco link" software
manual.