KACO XP83U-H6 (Canada) - Manual (Page 50)

Page 50
Switch on the grid voltage via the external breaker or switch. Switch on the solar generator via the DC
disconnecting switch or DC plug-type connectors.
Once the inverter is connected, the GUI turns on. After about two minutes, the GUI will ask if you would like
to
change the country settings. Select "NO". Note: If the GUI gives the warning "Current settings don't match
and countries. Wrong country setting may result in damage!!", this is a bug , select 'Ok' and disregard. If the
dialog "Current country settings are set to USA CANADA MEXICO" displays, select "OK" and disregard.
See GUI screen.
Touch the “ON” button on GUI screen.
If no fault is present the inverter will begin
operation.
The inverter will start operating and GUI
icons will be green.