KACO XP83U-H6 (Canada) - Manual (Page 49)

Page 49
11. OPERATING
Startup Instructions
Inside of the Inverter
After installation and electrical connection, the Inverter will be ready for operation.
Follow these instructions.
• Check that the switches in the part1 are turned on. If not, turn on the switches.
• Check that the switches in the part2 are turned on. If not, turn on the switches.
•
Turn on the switch in the part3.
•
Close the cabinet doors.
•
Turn on the AC and DC, and disconnect switches on the left cabinet door.
DANGER!
High voltage may be present inside inverter. When turning off or on the switches, be careful not to touch
conductors.
Part 1
Part 2
Part 3