Installation & transportation – KACO XP83U-H6 (Canada) User Manual
Page 18
Page 18
5. INSTALLATION & TRANSPORTATION
Selecting an appropriate place of installation
If possible the inverter should be installed in an area that is as dry as possible. This is to ensure maximum
product longevity. Additionally, if the ambient temperature at the installation site is above or below the
specifications designated by the manufacturer, the inverter should then be mounted indoors where the
ambient temperature can be controlled within the specifications. Again, this is in order to ensure maximum
product longevity.
The following rules should be observed while choosing the site for the installation of your inverter:
1. Ensure good access for assembly or service work.
2. Please ensure free air circulation at the sides of the housing.
3. The place of installation must ensure proper heat dissipation. If necessary, provide forced ventilation of
the room to ensure that heat is dissipated adequately.
4. Ensure that the supporting area has an adequate load-bearing capacity.
Weights and Dimensions
The installation site must be
easily accessible for installation or service work and should preferably not
expose the inverter to direct sunlight or enclose the inverter in an unventilated space.
XP100U-H2: Weight: 1400Kg
XP100U-H4: Weight: 1400Kg
XP83/90/100U-H6: Weight: 1100kg