KACO XP83U-H6 (Canada) - Manual (Page 2)

Page 2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions for the Inverter 1 that shall be followed during installation,
operation, and maintenance of the inverter.
Warning - These service instructions are for use by qualified personnel only. To reduce the risk of electric
shock, do not perform work other than that specified in the operating instructions unless you are qualified to
do so.
Caution - To reduce the risk of fire, connect only to a circuit provided with 150 (H4 models), 400 (H2 models)
and, 125 (H6 models) amperes maximum branch-circuit over current protection in accordance with the
National Electrical Code, ANSI/NFPA 70.
NOTE: THE H6 models are certified for use in Canada only.
Warnings
A warning describes a hazard to equipment or personnel. It calls attention to a procedure or practice, which,
if not correctly performed, could result in damage to or destruction of part or all of the Inverter equipment
and/or other equipment connected to the Inverter equipment or personal injury.
DANGER!
“DANGER” indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING!
"WARNING" indicates a hazardous situation which, if not avoided, could result in death or serious injury.
1 Hereinafter referred to as all five Models (XP100U-H2, XP100U-H4, XP100U-H6, XP83U-H6, and XP90U-H6), unless specific model names are
indicated.