beautypg.com

5 performing a software update – KACO blueplanet 5.0 - 9.0 TL3 User Manual

Page 42

background image

EN

EN

Configuration and Operation

Page 42

Operating Manual KACO blueplanet 5.0TL3 - 9.0TL3

NOTE

You can also access the web server of the inverter via the Internet. To do this, additional settings of
your network confi guration, particularly your Internet router, are required.

Note that communication with the inverter is carried out over an unsecured connection, particularly
in the case of a connection over the Internet.

Calling up the web server

↻ Confi gure the Ethernet interface.

↻ Connect the Ethernet interface.
1.

Open an Internet browser.

2. In the address fi eld of the Internet browser, enter the IP address of the inverter and open the site.

»

The Internet browser displays the start screen of the web server.

After it has opened, the web server displays information about the inverter as well as the current yield data. The web
server enables the following measurement data and yield data to be displayed:

Feed-in power

Generator power

Status

Generator voltage

Grid power

Unit temperature

Grid voltage

In order to display and export yield data, proceed as follows:

Select the display period

1.

Open the web server.

2. Select the display period by choosing either daily view, monthly view, yearly view or overview.

Filtering display data (daily view only)

1.

Open the web server.

2. Select daily view.

3. To show or hide measured values, select or deselect the corresponding checkboxes in the “Select display”

area.

Exporting data

1.

Filter the display data if necessary.

2. Select the display period if applicable (daily, monthly, yearly or overview).

3. Click the “Export data” key.

4. Save the fi le.

NOTE

Regardless of the display data selected in the “Select display” area, an export fi le always contains all
measurement data and yield data available for the selected period.

8.5

Performing a software update

You can update the software of the inverter to a new version using the integrated USB interface. Use a FAT32-format-
ted USB stick to do this. Do not use any storage media with an external power supply (for example: an external hard
disk).