KACO blueplanet 5.0 - 9.0 TL3 - Manual (Page 30)

EN EN
Configuration and Operation
Page 30 Operating Manual KACO blueplanet 5.0TL3 - 9.0TL3
Authorised electrician
Operating status LEDs Display Description
Feed-in start Power fed into the grid
or measured values
The green "Operating" LED is lit.
The green "Feed-in" LED is illuminated
after the country-specifi c waiting period*.
The inverter is ready to feed in, i.e. is on
the grid.
You can hear the grid relay switch on.
* The waiting time is used to monitor the grid and it ensures that all net parameters are in a permissible range.
For country-specifi c waiting periods, see our website at http://www.kaco-newenergy.de/.
Feed-in operation Power fed into the grid
or measured values
The green "Operating" LED is lit.
The green “Feed-in” LED is illuminated.
The “Feed-in” icon appears on the desk-
top.
The inverter feeds into the grid.
Non-feed-in opera-
tion
Status message The display shows the corresponding
message.
Fault Fault message The display shows the corresponding
message.
The red "Fault" LED is illuminated.
8.1.2 Graphical display
The graphical display shows measured values and data and allows the confi guration of the inverter using a graphi-
cal menu. In normal operation, the backlighting is switched off . As soon as you press one of the control buttons, the
backlighting is activated. If no button is pressed for an adjustable period of time, it switches off again. You can also
activate or deactivate the backlighting permanently. In sleep mode, the inverter deactivates the display regardless
of the selected setting.
1
2
3
4
5
6
7
8
Figure 32: Desktop
Key
1 Current date 6 Status bar
2 Current power 7 Current time
3 Menu indicator 8 Feed-in indicator
4 Daily yield
5 Annual yield
After being switched on and after the initial start-up is complete, the inverter displays the start screen (the desktop).