KACO blueplanet 5.0 - 9.0 TL3 - Manual (Page 14)

EN EN
Mounting
Page 14 Operating Manual KACO blueplanet 5.0TL3 - 9.0TL3
NOTE
Power reduction due to heat accumulation.
If the recommended minimum clearances are not observed, the inverter may go into power regula-
tion mode due to insuffi
cient ventilation and the resulting heat build-up.
›
Maintain minimum clearances.
› Provide for suffi cient heat dissipation.
<20°
Figure 4: Instructions for wall mounting Figure 5: Inverter for outdoor installation
CAUTION
Use suitable mounting parts.
› Use only the supplied mounting parts.
›
Mount the inverter upright on a vertical wall only.
›
For a free-standing mounting an incline of 20° is allowed.