KACO blueplanet 5.0 - 9.0 TL3 - Manual (Page 31)

EN
Configuration and Operation
Operating Manual KACO blueplanet 5.0TL3 - 9.0TL3 Page 31
If you are in the menu and do not touch the control buttons for two minutes, the inverter returns to the desktop.
NOTE
Depending on the tolerances of the measuring elements, the measured and displayed values are not
always the actual values. However, the measuring elements ensure maximum solar yield. Due to
these tolerances, the daily yields shown on the display may deviate from the values on the grid
operator’s feed-in meter by up to 15%.
8.1.3 Control buttons
The inverter is operated using the 4-way button and the OK and ESC buttons.
Desktop
Opening the menu
↻ The inverter is operating.
↻ The LCD is showing the desktop.
 Press the right arrow button.
» The menu opens up over the desktop from left to right.
Displaying the daily output
↻ The inverter is operating.
↻ The LCD is showing the desktop.
 Press the down arrow button.
» The LCD displays the daily yield in a diagram.
 To return to the desktop, press any button.
Inverter menu
Navigating through the menu
↻ You have left the desktop. The inverter displays the menu.
 Use the up and down arrow buttons.
Opening a menu item or a setting
 Use the right arrow button and the OK button.
Jump to the next higher menu level/discard changes
 Press the left arrow button or the ESC button.
Opening the parameter menu
 Press the up arrow key and down arrow key simultaneously for 5 seconds.