Yaskawa MP2000 Series I/O Module User Manual - Manual (Page 65)

3.1 Outline of LIO-04/LIO-05 Modules
3.1.3 Specifications
65
3
LIO-04/LIO-05 Module
3.1.3 Specifications
The following shows the specifications of the LIO-04/LIO-05 Modules.
( 1 ) Hardware Specifications
( 2 ) Environmental Conditions
Item Specifications
Classification I/O Module
Name LIO-04 LIO-05
Model JAPMC-IO2303 JAPMC-IO2304
Digital Input
32 inputs
24 VDC
± 20% (+19.2V to +28.8V), 4.1 mA (TYP),
combined sink mode/source mode inputs (DI-00, -01, -16, and -17 also used for interrupts)
Number of simultaneously ON inputs: 16 (8/connector with 24 VDC),
10 (5/connector with 28.8 VDC)
*For details, refer to ( 3 ).
Digital Output
32 outputs
24 VDC
± 20% (+19.2V to +28.8V),
100 mA max.,
transistor outputs, sink mode outputs
32 outputs
24 VDC
± 20% (+19.2V to +28.8V),
100 mA max.,
transistor outputs, source mode outputs
LED Indicators
RUN (green)
FUSE (red)
Connectors
CN1: I/O connector
CN2: I/O connector
Current Consumption 500mA max.
Dimensions (mm) 125 × 95 (H× D)
Mass 80 g
Item Specifications
Environmental
Conditions
Ambient Operating
Temperature
0 to 55 °C
Ambient Storage
Temperature
-25 to 85 °C
Ambient Operating
Humidity
30% to 95% (with no condensation)
Ambient Storage Humidity 5% to 95% (with no condensation)
Pollution Level Pollution level 1 (conforming to JIS B 3501)
Corrosive Gas There must be no combustible or corrosive gas.
Operating Altitude 2,000 m above sea level or lower
Mechanical
Operating
Conditions
Vibration Resistance
Conforming to JIS B 3502:
• 10 to 57 Hz with single-amplitude of 0.075 mm
• 57 to 150 Hz with fixed acceleration of 9.8 m/s
2
• 10 sweeps each in X, Y, and Z directions
(sweep time: 1 octave/min)
Shock Resistance
Conforming to JIS B 3502:
Peak acceleration of 147 m/s
2 twice for 11 ms each in the X, Y, and Z direc-
tions
Electrical
Operating
Conditions
Noise Resistance
Conforming to EN 61000-6-2, EN 55011 (Group 1, Class A)
Power supply noise (FT noise): 2 kV min., for one minute
Radiation noise (FT noise): 1 kV min., for one minute
Ground noise (impulse noise): 1 kV min., for 10 minutes
Electrostatic noise (contact discharge): 4 kVmin., for 10 times
Installation
Requirements Ground Ground to 100 Ω max.
Cooling Method Natural cooling